SEM Trim Paint Aerosol Black 15oz

Matches factory finish on many automotive exterior trim components.No primer needed for adhesion.The SEM 39143, Original Trim Black is a true, jet black color that restores the OEM trim appearance on automotive components. It can be used on properly cleaned aluminum, steel, stainless steel, and plastic. SEM Trim Paint Surface Preparation:  Wash the part thoroughly with 39362 SEM SOAP. Clean with good quality Grease and Wax remover such as SEM PN# 38373. Sand with 400 grit sandpaper and reclean with G&W remover. Mask off all areas not to be coated to protect from overspray. Apply light mist coats evenly allowing 5-10 minutes between coats. Several thin coats are better than 1 heavy coat.Salesman Note: Don't rush to install the part. Trim Paint adhesion improves with time. Full hardness and maximum adhesion should be obtained in about 48 hours.